 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Y Strainer Valve | Connection: | Flange Ends |
|---|---|---|---|
| Size: | DN65~DN200 | Color: | Customer's Request Blue |
| Body Material: | Cast Iron | Type: | Y Type Strainer. |
| Pressure: | 1.0~1.6 Mpa | Temperature Of Media: | ≤200 ℃ |
| High Light: | filter y strainer valve,60mm y strainer valve,60mm y type strainer valve |
||
The valve features:
1. Simple shape, good manufacturing technology, wide application range, easy to install.
2. Reasonable and compact structure, full appearance, can filter impurities in the medium in the work.
3. The medium can flow through the inlet direction of the valve, filter through the filter, and flow out from the outlet to achieve the purpose of filtration
| Part Name | Material |
| Body,Bonnet | HT200 |
| Filter | 304 |
| Type | (DN) | Size | ||||||
| L | B | C | D | E | F | H | ||
| 65 | 285 | 22 | 4×Φ19 | Φ65±2 | Φ140 | Φ175 | 191 | |
| 80 | 305 | 22 | 8×Φ19 | Φ80±2 | Φ150 | Φ185 | 230 | |
| 100 | 360 | 24 | 8×Φ19 | Φ100±2 | Φ175 | Φ210 | 283 | |
| 125 | 410 | 24 | 8×Φ23 | Φ125±2 | Φ210 | Φ250 | 335 | |
| 150 | 480 | 26 | 8×Φ23 | Φ150±2 | Φ240 | Φ280 | 387 | |
| Type | Pressure(MPa) | Test pressure MPa | Temperature℃ | Medium |
| strength(water) | ||||
| (KS)YDST | 1.0 | 2.0 | -10~200℃ | Steam |
1. This product is installed on the pipeline to filter impurities in the pipeline and protect the normal operation of valves or equipment.
2. Bypass the pipe for installing the product.
3. The pipe and valve cavity should be cleaned before installation.
4. The valve shall not be subject to large external force after installation.
5. When the local minimum temperature is lower than 4℃, insulation protection should be done; As the end valve, it should be heated with a pipe or jacket to prevent the temperature of the pipe wall from falling below 0℃.
6. It is strictly prohibited to install and use in the pipeline under vibration or rapid changes in medium temperature.
7. The product is usually installed at the inlet of the pressure reducing valve, hydraulic control valve and other equipment. The installation position should be 6-10 times from the diameter of the protection valve, and the flow direction of the medium should be consistent with the arrow direction on the valve body; Otherwise, the filtering effect cannot be achieved.
8. The pipe and valve cavity should be cleaned before installation. The cleaning cycle within 3 years after installation and use is as follows, and once a year after 3 years.
1. This product is suitable for nominal pressure ≤ 1.6mpa, temperature 0℃~120℃ water, ≤ 0.2mpa saturated steam, oil pipeline, can filter the dirt, precipitation, rust and other debris in the medium
2. The valve is from the medium into the inlet, through the filter to achieve the purpose of filtration, outflow from the outlet
· Nominal pressure: 1.6mpa
· Nominal diameter: DN32-450mm
· Applicable temperature and medium:
·The main material is gray cast iron, applicable temperature 0℃ ~ 120℃, applicable medium: water, ≤ 1.0mpa steam, oil products;
·The main material is ductile iron, applicable temperature 0℃ ~ 200℃, applicable medium: water, ≤ 1.0mpa steam, oil products;
· Design and manufacture: GB/T12233 refer to the universal valve iron globe valve and lift check valve
· Structure length: GB/T12221 metal valve structure length or manufacturer's standard
· Connecting end: JB/T 78 integral cast iron flange
· Inspection and test: GB/T13927 industrial valve pressure test
Contact Person: Ms. Ada Chen
